Full-Scale Overload Protection Digital Clamp Multimeter Working Temperature 18°C~28°C
GENERAL SPEClIFICATIONS
- Auto-ranging/Manual ranging
- Full-scale overload protection
- The maximum allowable voltage between the measuring end and the earth: 1000V DC or 750V AC
- Display: LCD
- Maximum display value: 5999 digits
- Polarity indication: Automatic indication,'-indicates negative polarity.
- Over range display: 'OL' or '-OL'.
- Sampling time: about 3 times / sec
- Unit display: with function, power unit display.
- Automatic shutdown time: approx.15 minutes after no signal
- Power supply: DC power supply 4.5V
- Battery type: 1.5V AAA battery
- Battery under voltage indication:display symbol on LCD.
- Temperature coefficient: less than 0.1×accuracy/°℃
- Working temperature: 18°C~28°C
- Storage temperature:-10°C～50C
- Size: 208× 78 × 35mm
- Jaw opening maximum size: approx. 36mm
- Clamp can measure the maximum diameter: approx.26mm
- Weight: approx. 240g (including battery)
TECHNICAL SPECIFICATIONS
Measuring range & accuracy
(Accuracy guaranteed at 23℃C±5℃C, humidity <75%)
Note: When measuring Sine waves with the true RMS method the meter may display a reading between 1-50A. This is normal and does not affect the accuracy of the meter.
AC Current
| Range |
Accuracy |
Resolution |
| 60A |
±(2.5% rdg + 8 digits) |
0.01A |
| 600A |
0.1A |
Max. input current: 600AAC.
Frequency range: 50Hz.
DC Current
| Range |
Accuracy |
Resolution |
| 60A |
±(2.0% rdg + 8 digits) |
0.01A |
| 600A |
0.1A |
Max. input current: 600AAC.
INRUSH Current
| Range |
Accuracy |
Resolution |
| 60A |
±(5.0% rdg + 60 digits) |
0.01A |
| 600A |
1A |
Inrush measurement time: 100ms.
Amperage range: 20 ~ 600A.
Frequency range: 40 ~ 400Hz.
DC Voltage
| Range |
Accuracy |
Resolution |
| 600mV |
±(0.8% rdg + 5 digits) |
0.1 mV |
| 6V |
0.001V |
| 60V |
0.01V |
| 600V |
±(1.0% rdg + 5 digits) |
0.1V |
Input impedance: 10MQ.
Max. input voltage: 600V AC (RMS) or 600V DC.
Frequency range: 40 ~ 1000Hz
Note:
In the low voltage range, with the test leads is not connected to the circuit under test, the Meter may have a fluctuating reading, this is normal, this it is caused by high sensitivity of the Meter, it does not affect the actual measurement results.
Product Tags:
|
|
LCD Display Smart Electrician Digital Multimeter Auto Ranging / Manual Ranging Images
|
